Biocera A (Nano Silver Inorganic Antibacterial Agent)
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- antibacterial, purification, chemical component
- Category
- Hair Brush
Product name | Biocera A (Nano Silver Inorganic Antibacterial Agent) | Certification | - |
---|---|---|---|
Category | Hair Brush | Ingredients | - |
Keyword | antibacterial , purification , chemical component | Unit Size | - |
Brand name | - | Unit Weigh | - |
origin | Stock | - | |
Supply type | - | HS code | - |
Product Information
Product Introduction
Bio Cera A is nontoxic agent, which is composed of ca-phosphate, Alumina and silica as carrier and Silver Ag ions, which are harmless to the human body. Bio Cera A is an inorganic antibiotic agent and active function to the living body by the infrared rays radiation ceramic at the same time.
Bio Cera A is added to the product, which is endowed with antibiotic function, thus it shows most effective antibiotic ability through contact with various kinds of microbe.
Generally, organic antibiotic agents do not have high heat resistance. In contrast, the inorganic agent Bio Cera A permits better thermal stability even at temperatures up to 1200℃, thus is displaying a wide range of applicability.
Antibacterial mechanism
- Sterilization by active oxygen of ceramic.
- Sterilization by Nano Ag ions.
- Adsorption of bacteria, organic matter and gas.
Features
- FDA certificate (Safety test)
- Antibacterial, antifungal and Deodorizing functions
- Increase electric conductivity
- Prevent aging
- Promote blood circulation
- Decontaminate drinking water
- Non harmful to human body and Non toxic
Specifications
Appearance |
Fine white powder |
Particle size |
3~4μm(micron) |
Heat stability |
1,200℃(2,192F) |
Components |
SiO2, CaO, P2O5, Ag, Zn, Mg |
Antibiotic Power |
Min. 90 |
Main agent |
Ag, Active oxygen |
Main Function |
Killing bacteria, Fungi, Mould |
Usage
Household electric appliance |
Plastics components (inner, housing) of washing |
Synthetic fibers |
Acryl |
Construction materials |
Water Tank |
Wrapping and putting |
Film (PET, Nylon, P.E) |
Paper |
Wall paper |
Stationery and Toys |
Crayon pastel |
Cosmetics |
Foundation |
Antimicrobial Efficacy Test
- Shake flask Method: cells number/ml
- Test condition : At 25 ℃ for 24hrs, dilutions of cultures are divided by pour agar plate method to determine bacteria cell growth inhibition rate. (Surface area : 5cm I 6cm)
- Test bacteria: Escherichia coli (ATCC 25922)
Test Result
|
Blank |
Added |
|
Start |
5.9 x 103 |
5.9 x 103 |
Cells number / ml |
After 24hrs |
2.8 x 105 |
10 |
|
Safety Data
Follow results, Bio Cera A's safety data to the human body.
- Oral toxicity test - FDA Certification
Test animal: ICR mouse
Test items: LD50 value > 10,000mg/kg
Clinical symptoms: None
Variation of weight: None
- Clastogenic activity Test
Test results: NO
- Mutation test
Object of test: Salmonella Typhimurium
Test result: (-)
So, the Bio Cera A is harmless to the human body.
Application
1. PLASTIC (PE, PP, ABS)
Application and added quality
- Process for application
Bio Cera A must be used to plastics with powder itself or by the dilution method of concentrated Master Batch (M/B) - Recommended Grade
Bio Cera A M/B concentrated 20 ~ 40 wt% by Powder
Key Point
- The antibiotic ability will be depend on the kinds of Resin and property
- The lower density Resin will be better to get the antibiotic effect than the higher density Resin
- The below case shows the best resin on the basis of the same added
Bio Cera A(powder) Quantity to each Resin PE , PP(2wt%)> PVC, ABS (3 ~4wt%)> PC (Min 4wt%) - The added quantity will be changed by each company's technology to the degree of 0.2 wt%
- The added quantity of Bio Cera A will be higher than that in case of thermosetting plastic
- It is sufficient that M/B will be concentrated between 20 ~ 40wt%
2. PAINT
Application and added quantity
- Process for application
Bio Cera A may be used in wet mill processing before the raw material such like resin, solvent, pigment, interfacial active agent are putted in wet mill. - Recommended grade Bio Cera A powder
- Recommended added quantity min 2 wt%
Key point
- It must be used before wet mill processing
- It will be better for using after make a slice agitation in case of long storage
- If it requires the dilution before using, it would be better to reduce the ratio of dilution
3. COSMETIC
Application and added quantity
- Process for application
Bio Cera A is mainly used for foundation. color cosmetic itself, cosmetic product case and puff - Recommended Grade
Bio Cera A powder - Recommended added quantity 1.0 wt%
Key point
- It must be used before mixing process
- It is the best way for user only to use inorganic Biocera A itself without any anti-septic agent, but if in case of needed a little antiseptic agent according to cost and other condition, it is available to use both at the same time.
4. CRAYON
Application and added quantity
- Process for application
Bio Cera A must be putted in mixing process before crayon strength process - Recommended Grade
Bio Cera A powder - Recommended added quantity 1.0 wt%
Key point
- To do raise antibiotic ability at high-dispersion process, it needs to be decided which operation would be reasonable?
5. PAPER
Application and added quantity
- Process for application
In case of inner paper, The Bio Cera A is used to stencil paper after dispersing uniformly into spread acid. In case of outer paper, The Bio Cera A is used in resin coating process at highly dispersing equally - Recommended Grade
Bio Cera A powder - Recommended added quantity
1 wt% at stencil paper / 1 wt% at final paper
Key point
- It needs anti-precipitate agent after spread acid mixing at precipitation tank and It needs to maintain high-dispersion
- To get a excellent antibiotic capability, It must be used in mixing together with spread acid and Bio Cera A and effectively wet mill milling.
6. FIBER
Application and added quantity
- Process for application
It is mixed with A-Type and synthetic resin, then well melting. The fiber will be made after mixing under the condition of high-dispersion. - Recommended Grade
Bio Cera A powder - Recommended added quantity 2.0 wt% at resin
Key point
- It is not available to use in original fiber.
- It is limited to use in double fiber thickness according to A-Type itself tail's size.
- The fiber will be manufactured by mixing with M/B
7. RUBBER
Application and added quantity
- Process for application
Bio Cera A will be putted before rubber accelerator and other additive had putted in rubber raw material, then fully mixing and subsequent final product strength. - Recommended Grade
Bio Cera A powder - Recommended added quantity 1.0 wt%
Key point
- It must be maintained to put rubber accelerator at first before added Bio Cera A into product under the condition of full rubber process.
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Hyoung Tag, Jeon
- Address
- #C-202, Korea Biopark, 694-1, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea
- Product Category
- Health Care Supplement,Other Chemicals,Water Treatment
- Year Established
- 2000
- No. of Total Employees
- 1-50
- Company introduction
-
Since its establishment in 1994, Biocera Co., Ltd. has been proud of our technologies to provide the best healthy water-related products to meet our customer's needs. Biocera is capable of manufacturing A A Water (Antioxidant Alkaline Water) solutions including AA Filter, AA Jug, Showerheads, Green balls and the application products for antioxidant hydrogen alkaline water are selling across the world. Biocera strives for the health and happiness of our customers through competitive research on bioceramics, technology transfer, and joint investments, with the world-class quality certified by NSF/ANSI/CAN 61, 372 as well as NSF/ANSI 42 and patented in US.
eramic antibacterial, far infrared, and photocatalyst coating agents; water activated ceramic balls and its application products for antioxidant hydrogen alkaline water filtration apparatus purposes. Biocera strives for the health and happiness of our customers through competitive research on bioceramics, technology transfer, and joint investments.
- Main Markets
-
China
Indonesia
Japan
Viet Nam
- Main Product
- Attached File