Multi-Purpose Solution

HARD SOFT CONTACT LENS MULTIPURPOSE SOLUTION 

Usage 

 Step 1: Drop 3 drops of this solution on both surfaces of the lens and rub for 20 seconds. 

 Step 2: Rinse the surface of the lens thoroughly with this solution to remove any residue remaining on the surface of the lens.   Step 3: Put the cleaned lenses in the lens case and soak them in this clean solution for at least 4 hours. These lenses can be worn at any time. There is no need to separately rinse again with saline. If any residue is left on the lens, they can be used after rinsing again with this solution. The lens case cap should be closed if the lenses are not to be put on immediately. Since saline does not have a sterilizing effect, do not mix this solution with saline

Protein removal from contact lenses

When cleaning and disinfecting lenses daily with this solution, proteins are also removed, so there is no need to use a separate protein remover or daily cleaning agent

1. CE(MDD) certificate

2. Iso13485

3. Certificate of korea Halal

4. Certificate of product-specific approved exporter

5. Stand-alone test (Inoculum challenge test)

6. Antimicrobial preservative efficiency test

7. Agar diffusion test

8. Skin sensitization test

9. Ocular irritation test