HANA H2100 is an injector with a high flow rate specification. It is a high flow (327-473L) injector suitable for high-power engines or medium or heavy-duty truck engines over 3,000 cc. The H2100 injector can be supplied only with GOLD (nozzle mountable) type and is designed for 12V and 24V to provide a variety of operating pressures and flow rates as voltage characteristics are adjusted. Internal design improvements have resulted in '1.2ms' short injector opening and closing times, with excellent flow controllability and a wide stability range.

[APPROVED PERFORMANCE] HANA injectors comply with EURO-6 emission regulations and consistently inject the correct amount of gas fuel into each engine cylinder to promote smooth engine operation and a balanced fuel supply to ensure optimal performance.

[PREMIUM QUALITY] Innovative design solutions and excellent stainless steel and rubber materials for corrosion resistance and low-temperature conditions ensure improved operating performance and body strength, and a long service life.

[STANDARDS & APPROVALS] HANA H2000 injector has been approved under approval No. E11 67R-010251, E1 110R-000501 and meets the requirements of UNECE Regulations. HANA is also certified to the international standard of ISO 9001, ISO 15500-7.

[WIDE CONFIGURABILITY] Wide configurability of injectors flow rates provides installers with opportunities in terms of selection. A distinction is made between the 'GOLD' UNI injectors of type A, where the flow can be reduced to type B & C by using screw-in nozzles. Depending on the voltage characteristics 12V & 24V, it can be used in low pressure or high-pressure engines.

[18-MONTH WARRANTY] The injector guarantees 40,000 miles driving performance, and in the event of failures such as ignition failure, breakdown, or stop working, we provide a REPLACEMENT service within the warranty period through cause analysis.

HANA lpg & cng High flow H2100 Injectors fit heavy duty vehicles 

Features

· Quantity: 4 or 6 lpg & cng Injectors

· Condition: 100% HANA BRAND

· O-Rings Included: Yes, preinstalled

· Injector Design: Top feed type

· Connector Type: KET connector [KET MG640543-5]

· Filter Design: Basket filter design at inlet [no filter with hose type]

Specification

· Voltage: DC 12V / 24V 

· Coil Resistance: 1.4 Ohms @ 12V & 24V

· Static Flow Rate:  12V A type 175L/min / B type 15L/min  

                           24V A type 327-473L/min / B type 278-410L/min / C type 215-328L/min

· Opening time: 2.92ms, 12V / 1.2ms, 24V

· Closing time: 1.2ms, 12V & 24V

· Control current: 12V peak 5.5A / hold 2.5A

                        24V peak 7.5A / hold 2.5A

· Operation pressure(gauge): 12V 1.2bar

                                       24V 5-8bar

· Max open pressure: 12V 6bar

                             24V 12bar

· Operating Temperature: -20℃(-4℉) to 120℃(248℉)

· Length: Rail 3.25" (82.5mm) / Hose 3.84" (97.5mm)

· Package Includes: 4 or 6 x Injectors for Rail

                          4 x Injectors for hose

· Operating Gas: LPG / CNG / LNG