Lead Screw(TM Screw)
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- South Korea
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- lead screw, tm screw
- Category
- Screws
Korea Lintec Shaft
South Korea
- Verified Certificate
-
14
| Product name | Lead Screw(TM Screw) | Certification | - |
|---|---|---|---|
| Category | Screws | Ingredients | - |
| Keyword | lead screw , tm screw | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | South Korea | Stock | - |
| Supply type | - | HS code | - |
Product Information
| TMR(Standard Rolling 30° TM Screw) | |||||||||
| TMR Number | Lead P | Lead Angle | Standard Measurement | L(mm) | Weight (kgf/m) | ||||
| D | D2 | D1 | |||||||
| TMR 10 | 2 | 4'02'46" | 10 | 9.0 | 7.5 | 1000 | 0.5 | ||
| TMR 12 | 2 | 3'18'44" | 12 | 11.0 | 9.5 | 1000 | 0.8 | ||
| TMR 14 | 3 | 4'22'07" | 14 | 12.5 | 10.5 | 1000 | 2000 | 1.0 | |
| TMR 16 | 3 | 3'46'04" | 16 | 14.5 | 12.5 | 1000 | 2000 | 1.3 | |
| TMR 18 | 4 | 4'32'59" | 18 | 16.0 | 13.5 | 1000 | 2000 | 1.6 | |
| TMR 20 | 4 | 4'02'46" | 20 | 18.0 | 15.5 | 1000 | 2000 | 2.0 | |
| TMR 22 | 5 | 4'39'58" | 22 | 19.5 | 16.5 | 1000 | 2000 | 3000 | 2.3 |
| TMR 25 | 5 | 4'02'56" | 25 | 22.5 | 19.5 | 1000 | 2000 | 3000 | 3.1 |
| TMR 28 | 5 | 3'34'17" | 28 | 25.5 | 22.5 | 1000 | 2000 | 3000 | 4.0 |
| TMR 32 | 6 | 3'46'04" | 32 | 29.0 | 25.5 | 1000 | 2000 | 3000 | 5.2 |
| TMR 36 | 6 | 3'18'44" | 36 | 33.0 | 29.5 | 1000 | 2000 | 3000 | 6.7 |
| TMR 40 | 6 | 2'57'18" | 40 | 37.0 | 33.5 | 1000 | 2000 | 3000 | 8.4 |
| TMS(Standard Rolling Stainless 30° TM Screw) | |||||||||
| TMS Number | Lead P | Lead Angle | Standard Measurement | L(mm) | Weight (kgf/m) | ||||
| D | D2 | D1 | |||||||
| TMS10 | 2 | 4'02'46" | 10 | 9.0 | 7.5 | 1000 | 0.5 | ||
| TMS12 | 2 | 3'18'44" | 12 | 11.0 | 9.5 | 1000 | 0.8 | ||
| TMS14 | 3 | 4'22'07" | 14 | 12.5 | 10.5 | 1000 | 2000 | 1.0 | |
| TMS16 | 3 | 3'46'04" | 16 | 14.5 | 12.5 | 1000 | 2000 | 1.3 | |
| TMS18 | 4 | 4'32'59" | 18 | 16.0 | 13.5 | 1000 | 2000 | 1.6 | |
| TMS20 | 4 | 4'02'46" | 20 | 18.0 | 15.5 | 1000 | 2000 | 2.0 | |
| TMS22 | 5 | 4'39'58" | 22 | 19.5 | 16.5 | 1000 | 2000 | 3000 | 2.3 |
| TMS25 | 5 | 4'02'56" | 25 | 22.5 | 19.5 | 1000 | 2000 | 3000 | 3.1 |
| TMS28 | 5 | 3'34'17" | 28 | 25.5 | 22.5 | 1000 | 2000 | 3000 | 4.0 |
| TMS32 | 6 | 3'46'04" | 32 | 29.0 | 25.5 | 1000 | 2000 | 3000 | 5.2 |
| TMS36 | 6 | 3'18'44" | 36 | 33.0 | 29.5 | 1000 | 2000 | 3000 | 6.7 |
| TMS40 | 6 | 2'57'18" | 40 | 37.0 | 33.5 | 1000 | 2000 | 3000 | 8.4 |
| TMC(Standard Rolling Stainless 30° TM Screw) | ||||||||||
| TMC Number | Lead P | Lead Angle | Standard Measurement | L(mm) | Weight (kgf/m) | |||||
| D | D2 | D1 | ||||||||
| TMC10 | 2 | 4'02'46" | 10 | 9.0 | 7.5 | 250 | 500 | 0.5 | ||
| TMC12 | 2 | 3'18'44" | 12 | 11.0 | 9.5 | 500 | 750 | 0.8 | ||
| TMC14 | 3 | 4'22'07" | 14 | 12.5 | 10.5 | 500 | 750 | 1.0 | ||
| TMC16 | 3 | 3'46'04" | 16 | 14.5 | 12.5 | 500 | 750 | 1000 | 1.3 | |
| TMC18 | 4 | 4'32'59" | 18 | 16.0 | 13.5 | 750 | 1000 | 1.6 | ||
| TMC20 | 4 | 4'02'46" | 20 | 18.0 | 15.5 | 500 | 750 | 1000 | 1250 | 2.0 |
| TMC22 | 5 | 4'39'58" | 22 | 19.5 | 16.5 | 750 | 1000 | 1250 | 2.3 | |
| TMC25 | 5 | 4'02'56" | 25 | 22.5 | 19.5 | 500 | 750 | 1000 | 1500 | 3.1 |
| TMC28 | 5 | 3'34'17" | 28 | 25.5 | 22.5 | 1000 | 1500 | 4.0 | ||
| TMC32 | 6 | 3'46'04" | 32 | 29.0 | 25.5 | 1000 | 1500 | 5.2 | ||
| TTM(Round Nut "Standard" Type) | |||||||||||||||
| TTM Number | Lead P | Lead Angle | Standard Measurement | D3 | L | D4 | T | P.C.D | B | a | L2 | Weight (kgf) | Fo (Kgf) | ||
| D | D2 | D1 | |||||||||||||
| TTM10 | 2 | 4'02'46" | 10.5 | 9.0 | 8.5 | 20 | 24 | 36 | 5 | 26 | 4.3 | 1.5 | 9.5 | 0.079 | 260 |
| TTM12 | 2 | 3'18'44" | 12.5 | 11.0 | 10.5 | 22 | 30 | 44 | 5 | 31 | 5.4 | 1.5 | 12.5 | 0.118 | 400 |
| TTM14 | 3 | 4'22'07" | 14.5 | 12.5 | 11.5 | 22 | 30 | 44 | 5 | 31 | 5.4 | 1.5 | 12.5 | 0.111 | 500 |
| TTM16 | 3 | 3'46'04" | 16.5 | 14.5 | 13.5 | 28 | 35 | 51 | 6 | 38 | 6.6 | 1.5 | 14.5 | 0.201 | 640 |
| TTM18 | 4 | 4'32'59" | 18.5 | 16.0 | 14.5 | 32 | 40 | 56 | 6 | 42 | 6.6 | 2 | 18 | 0.284 | 890 |
| TTM20 | 4 | 4'02'46" | 20.5 | 18.0 | 16.5 | 32 | 40 | 56 | 6 | 42 | 6.6 | 2 | 18 | 0.266 | 1000 |
| TTM22 | 5 | 4'39'58" | 22.5 | 19.5 | 18.0 | 36 | 50 | 61 | 7 | 47 | 6.6 | 2.5 | 21.5 | 0.412 | 1260 |
| TTM25 | 5 | 4'02'56" | 25.5 | 22.5 | 21.0 | 36 | 50 | 61 | 7 | 47 | 6.6 | 2.5 | 21.5 | 0.370 | 1440 |
| TTM28 | 5 | 3'34'17" | 28.5 | 25.5 | 24.0 | 44 | 56 | 76 | 8 | 58 | 9.0 | 2.5 | 23 | 0.671 | 1800 |
| TTM32 | 6 | 3'46'04" | 32.5 | 29.0 | 27.0 | 52 | 56 | 76 | 8 | 58 | 9.0 | 2.5 | 23 | 0.599 | 2090 |
| TTM36 | 6 | 3'18'44" | 36.5 | 33.0 | 31.0 | 60 | 60 | 84 | 8 | 66 | 9.0 | 3 | 26 | 0.865 | 2630 |
| TTM40 | 6 | 2'57'18" | 40.5 | 37.0 | 35.0 | 70 | 70 | 98 | 10 | 76 | 11.0 | 3 | 30 | 1.321 | 3240 |
| 1) "Oil Hole" is required by customers need 2) Oil Hole mark is "O" Ex: TTM20-O | |||||||||||||||
| FTM(Round Nut "Square" Flangge Type) | ||||||||||||||||
| FTM Number | Lead P | Lead Angle | Standard Measurement | D3 | L | D4 | T | W | P.C.D | B | a | L2 | Weight (kgf) | Fo (Kgf) | ||
| D | D2 | D1 | ||||||||||||||
| FTM10 | 2 | 4'02'46" | 10.5 | 9.0 | 8.5 | 20 | 24 | 36 | 5 | 22 | 26 | 4.3 | 1.5 | 9.5 | 0.064 | 260 |
| FTM12 | 2 | 3'18'44" | 12.5 | 11.0 | 10.5 | 22 | 30 | 44 | 5 | 26 | 31 | 5.4 | 1.5 | 12.5 | 0.094 | 400 |
| FTM14 | 3 | 4'22'07" | 14.5 | 12.5 | 11.5 | 22 | 30 | 44 | 5 | 26 | 31 | 5.4 | 1.5 | 12.5 | 0.087 | 500 |
| FTM16 | 3 | 3'46'04" | 16.5 | 14.5 | 13.5 | 28 | 35 | 51 | 6 | 32 | 38 | 6.6 | 1.5 | 14.5 | 0.170 | 640 |
| FTM18 | 4 | 4'32'59" | 18.5 | 16.0 | 14.5 | 32 | 40 | 56 | 6 | 34 | 42 | 6.6 | 2 | 18 | 0.248 | 890 |
| FTM20 | 4 | 4'02'46" | 20.5 | 18.0 | 16.5 | 32 | 40 | 56 | 6 | 34 | 42 | 6.6 | 2 | 18 | 0.230 | 1000 |
| FTM22 | 5 | 4'39'58" | 22.5 | 19.5 | 18.0 | 36 | 50 | 61 | 7 | 38 | 47 | 6.6 | 2.5 | 21.5 | 0.368 | 1260 |
| FTM25 | 5 | 4'02'56" | 25.5 | 22.5 | 21.0 | 36 | 50 | 61 | 7 | 38 | 47 | 6.6 | 2.5 | 21.5 | 0.326 | 1440 |
| FTM28 | 5 | 3'34'17" | 28.5 | 25.5 | 24.0 | 44 | 56 | 76 | 8 | 47 | 58 | 9.0 | 2.5 | 23 | 0.588 | 1800 |
| FTM32 | 6 | 3'46'04" | 32.5 | 29.0 | 27.0 | 44 | 56 | 76 | 8 | 47 | 58 | 9.0 | 2.5 | 23 | 0.516 | 2090 |
| FTM36 | 6 | 3'18'44" | 36.5 | 33.0 | 31.0 | 52 | 60 | 84 | 8 | 54 | 66 | 9.0 | 3 | 26 | 0.778 | 2630 |
| FTM40 | 6 | 2'57'18" | 40.5 | 37.0 | 35.0 | 58 | 70 | 98 | 10 | 60 | 76 | 11.0 | 3 | 30 | 1.162 | 3240 |
| 1) "Oil Hole" is required by customers need 2) Oil Hole mark is "O" Ex: FTM 20-O | ||||||||||||||||
| ATM(Round Nut "H" Flangge Type) Standard Nut | ||||||||||||||||
| ATM Number | Lead P | Lead Angle | Standard Measurement | D3 | L | D4 | T | W | P.C.D | B | a | L2 | Weight (kgf) | Fo (Kgf) | ||
| D | D2 | D1 | ||||||||||||||
| ATM10 | 2 | 4'02'46" | 10.5 | 9.0 | 8.5 | 20 | 24 | 36 | 5 | 22 | 26 | 4.3 | 1.5 | 9.5 | 0.067 | 260 |
| ATM12 | 2 | 3'18'44" | 12.5 | 11.0 | 10.5 | 22 | 30 | 44 | 5 | 26 | 31 | 5.4 | 1.5 | 12.5 | 0.099 | 400 |
| ATM14 | 3 | 4'22'07" | 14.5 | 12.5 | 11.5 | 22 | 30 | 44 | 5 | 26 | 31 | 5.4 | 1.5 | 12.5 | 0.092 | 500 |
| ATM16 | 3 | 3'46'04" | 16.5 | 14.5 | 13.5 | 28 | 35 | 51 | 6 | 32 | 38 | 6.6 | 1.5 | 14.5 | 0.174 | 640 |
| ATM18 | 4 | 4'32'59" | 18.5 | 16.0 | 14.5 | 32 | 40 | 56 | 6 | 34 | 42 | 6.6 | 2 | 18 | 0.253 | 890 |
| ATM20 | 4 | 4'02'46" | 20.5 | 18.0 | 16.5 | 32 | 40 | 56 | 6 | 34 | 42 | 6.6 | 2 | 18 | 0.235 | 1000 |
| ATM22 | 5 | 4'39'58" | 22.5 | 19.5 | 18.0 | 36 | 50 | 61 | 7 | 38 | 47 | 6.6 | 2.5 | 21.5 | 0.366 | 1260 |
| ATM25 | 5 | 4'02'56" | 25.5 | 22.5 | 21.0 | 36 | 50 | 61 | 7 | 38 | 47 | 6.6 | 2.5 | 21.5 | 0.324 | 1440 |
| ATM28 | 5 | 3'34'17" | 28.5 | 25.5 | 24.0 | 44 | 56 | 76 | 8 | 47 | 58 | 9.0 | 2.5 | 23 | 0.588 | 1800 |
| ATM32 | 6 | 3'46'04" | 32.5 | 29.0 | 27.0 | 52 | 56 | 76 | 8 | 47 | 58 | 9.0 | 2.5 | 23 | 0.516 | 2090 |
| ATM36 | 6 | 3'18'44" | 36.5 | 33.0 | 31.0 | 60 | 60 | 84 | 8 | 54 | 66 | 9.0 | 3 | 26 | 0.773 | 2630 |
| ATM40 | 6 | 2'57'18" | 40.5 | 37.0 | 35.0 | 70 | 70 | 98 | 10 | 60 | 76 | 11.0 | 3 | 30 | 1.147 | 3240 |
| 1) "Oil Hole" is required by customers need 2) Oil Hole mark is "O" Ex: ATM20-O | ||||||||||||||||
| BTM(Square Nut) | ||||||||||||||||
| BTM Number | Lead P | Lead Angle | Standard Measurement | W | L | H | H0 | W0 | W1 | L1 | S1 | S2 | Weight (kgf) | Fo (Kgf) | ||
| D | D2 | D1 | ||||||||||||||
| BTM10 | 2 | 4'02'46" | 10.5 | 9.0 | 8.5 | 30 | 24 | 20 | 10 | 15 | 20 | 16 | M4 | 3.3 | 0.09 | 260 |
| BTM12 | 2 | 3'18'44" | 12.5 | 11.0 | 10.5 | 38 | 30 | 22 | 11 | 19 | 26 | 20 | M5 | 4.3 | 0.15 | 400 |
| BTM14 | 3 | 4'22'07" | 14.5 | 12.5 | 11.5 | 38 | 30 | 22 | 11 | 19 | 26 | 20 | M5 | 4.3 | 0.14 | 500 |
| BTM16 | 3 | 3'46'04" | 16.5 | 14.5 | 13.5 | 44 | 35 | 28 | 14 | 22 | 32 | 24 | M5 | 4.3 | 0.26 | 640 |
| BTM18 | 4 | 4'32'59" | 18.5 | 16.0 | 14.5 | 48 | 40 | 32 | 16 | 24 | 36 | 28 | M6 | 5.1 | 0.36 | 890 |
| BTM20 | 4 | 4'02'46" | 20.5 | 18.0 | 16.5 | 48 | 40 | 32 | 16 | 24 | 36 | 28 | M6 | 5.1 | 0.35 | 1000 |
| BTM22 | 5 | 4'39'58" | 22.5 | 19.5 | 18.0 | 62 | 50 | 38 | 20 | 31 | 46 | 34 | M8 | 6.8 | 0.64 | 1260 |
| BTM25 | 5 | 4'02'56" | 25.5 | 22.5 | 21.0 | 62 | 50 | 38 | 20 | 31 | 46 | 34 | M8 | 6.8 | 0.64 | 1440 |
| BTM28 | 5 | 3'34'17" | 28.5 | 25.5 | 24.0 | 68 | 56 | 47 | 25 | 34 | 52 | 40 | M8 | 6.8 | 1.04 | 1800 |
| BTM32 | 6 | 3'46'04" | 32.5 | 29.0 | 27.0 | 68 | 56 | 47 | 25 | 34 | 52 | 40 | M8 | 6.8 | 0.97 | 2090 |
| 1) "Oil Hole" is required by customers need 2) Oil Hole mark is "O" Ex: BTM 20-O | ||||||||||||||||
| STM(Square Nut) | |||||||||||||
| STM Number | Lead P | Lead Angle | Standard Measurement | D3 | L | Permission Load F0(kgf) | Addition Processing Measurement | Weight (kgf) | |||||
| D | D2 | D1 | a | b | f | t | |||||||
| STM10 | 2 | 4'02'46" | 10.5 | 9.0 | 8.5 | 20 | 20 | 260 | 1.5 | 4 | 14 | 2 | 0.043 |
| STM12 | 2 | 3'18'44" | 12.5 | 11.0 | 10.5 | 22 | 22 | 400 | 1.5 | 4 | 16 | 2 | 0.054 |
| STM14 | 3 | 4'22'07" | 14.5 | 12.5 | 11.5 | 22 | 22 | 500 | 1.5 | 4 | 16 | 2 | 0.048 |
| STM16 | 3 | 3'46'04" | 16.5 | 14.5 | 13.5 | 28 | 26 | 640 | 1.5 | 5 | 18 | 2.5 | 0.100 |
| STM18 | 4 | 4'32'59" | 18.5 | 16.0 | 14.5 | 32 | 31 | 890 | 2 | 7 | 22 | 2.5 | 0.160 |
| STM20 | 4 | 4'02'46" | 20.5 | 18.0 | 16.5 | 32 | 31 | 1000 | 2 | 7 | 22 | 2.5 | 0.145 |
| STM22 | 5 | 4'39'58" | 22.5 | 19.5 | 18.0 | 36 | 40 | 1260 | 2.5 | 7 | 26 | 2.5 | 0.245 |
| STM25 | 5 | 4'02'56" | 25.5 | 22.5 | 21.0 | 36 | 40 | 1440 | 2.5 | 7 | 26 | 2.5 | 0.212 |
| STM28 | 5 | 3'34'17" | 28.5 | 25.5 | 24.0 | 44 | 45 | 1800 | 2.5 | 10 | 32 | 4 | 0.388 |
| STM32 | 6 | 3'46'04" | 32.5 | 29.0 | 27.0 | 44 | 45 | 2090 | 2.5 | 10 | 32 | 4 | 0.330 |
| STM36 | 6 | 3'18'44" | 36.5 | 33.0 | 31.0 | 52 | 49 | 2630 | 3 | 12 | 40 | 4.5 | 0.530 |
| STM40 | 6 | 2'57'18" | 40.5 | 37.0 | 35.0 | 58 | 57 | 3240 | 3 | 15 | 42 | 5 | 0.762 |
| 1) "Oil Hole" is required by customers need 2) Oil Hole mark is "O" Ex: STM 20-O 3) Groove of Key mark is "K" Ex: STM 20-K | |||||||||||||
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
Korea Lintec Shaft
-
14
- President
- Woo-ho Lee
- Address
- #1208-Ga Dong(ChungAng Circulation Complex,Guro-Dong)15,Gyeongin-Ro,53-Gil, Guro-gu, Seoul, Korea
- Product Category
- High Precision Bearings
- Year Established
- 2002
- No. of Total Employees
- 1-50
- Company introduction
-
Greetings to customers all around the world!
Our company have been producing all sorts of shafts and exporting to the international market. Our brand "KLS" Shaft (Korea Lintec & Shaft) has been acknowledged for great quality control, competitive pricing, and punctual and fast delivery. Exports have been increasing continuously due to our excellent reputation of great deals and quality by our customers.
Especially, we have developed HPJ Brand's LM Bushings overseas (China), of which trademark HPJ has registered in Japan, which is used with our Shaft and we are exporting them in parallel, and has established ourselves as a maker of LM System. Any Buyers who has imported our Shaft and LM Bushings takes advantage of our
1) Competitive price
2) Top quality products
3) Fast delivery
and continues to do buy our "KLS" Brand Shafts and HPJ Brand LM Bushings. The long term relationship we maintain with these buyers are our greatest strengths.
And,also we are producing many other concerned Items such,
1) "Support Unit",
2)"Micro Coupling"
3)"Lock Nut" for Ball Screw,
4)"TM(Lead) Screw,
5)"Cross Roller Guide","Sector Elignment Stage" is No.2 in the world makers/factories
6)"Miniature Liner Guide",
7)"RodEnd & Camfollower", "Track Roller",
8)"Thrust Roller Bearings",etc.,
are all for Factory Automation Systems,and also for Robot Systems.
Therefore, in 2015, we will put our best effort into increasing our exports, and we promise you that we will be the number one Brand of above all Products in the near future.
Chief Representative: Woo Ho Lee
- Main Markets
-
Germany
- Factory Information
-
KLS,
Korealintec & Shaft
- Main Product
Related Products
JIS B 1190
Spare parts of BUHLER Feed Extruder Expander
Silicon bronze fastener
extruder spare part
Screw, bolts, nuts
