Just touch the card or mobile to the windshield! 
 
 
 
 

Starter Kill Device
The Starter Kill device is a theft prevention device installed into the ignition circuit of vehicles. When triggered, it prevents the electrical circuit from being completed, and therefore keeps the engine from starting.
 
The SKRF-100 Digital Failsafe Starter Kill is designed to be used as an option of Keyfree system such as (Keyfree Touch, Keyfree RF)
When used with the Keyfree RF, the SK100T prevents the starter from cranking.
The SKRF-100 has following features
 
Case 1. When the door locked by Keyfree RF
    To start the engine, the door should unlock by Keyfree RF and turn on the key.

Case 2. When the door locked by Remocon and unlocks the door with Remocon
    The engine starts with key or start button (common usage)
    * Starter Kill function will not work. 

Case 3. When the door locked by Keyfree RF and unlock by Remocon
    The engine cannot run. 

    * Starter Kill function work.


The SKRF-100 is simply touch the glass over the door, locked in a vehicle security, openness can be.
It is the best for anti-theft, outdoor activities such as Hiking, jogging, swimming and fishing.

The SKRF-100 has the following features
 
The SKRF-100 is a simple add-on module that will sit behind the front windshield of your car. In the event that you lock the keys inside, you can simply "Pass" your card or mobile outside of front windshield.
 
1. In order to register the card on the SKRF-100, after entering the pin-code and touch the card within 30 seconds.
2. The RF-type credit cards and transportation cards can be registered to the SKRF-100 (It need pre-test to register or not)
3. The RF type tag can be attaching the mobile phone and wallet
4. When you open or close the door with the engine working
- Frequent entry in the whole state of engine on suitable for delivery vehicles.
- It is very useful function such as emergency state, police and security man have no time to stop the engine and pull off the key.
5. Outdoor activities (Jogging, Swimming, Hiking… etc.)
6. Best of all, get PEACE OF MIND
 
Contents
     Keyfree RF main module,
     Starter Kill Control module,
     Auxiliary Keyfree Touch, Harness wire, manual 
Specifications
     Supply Voltage DC 12V (Negative signal only) 
     13.56MHz Multi-protocol RFID Reader chip 
     Supported Protocols:- ISO 1443 A/V type, ISO 15693
     - Tag-it (Texas Instrument)
     - Felica (Sony), I-CODE (NXP)
     - Jewel (Innovision) 

• Console unit dimensions: 95 (W) × 53 (H) ×11 (D) mm 
• Operating Current Draw: - 20mA (0.24W)
• Starter Kill module: No standby current
• Operating Environment - 30℃ to +80℃  (-22 F ~ 176°F)

Oversea partner (USA, Canada, Mexico, Brazil, Greece, Russia, Japan...etc)