DESCRIPTION

Tiger Foam (G)  is Gun type, a polyurethane-based fast curing expanding foam.

USES                           

• Filling gaps and voids that occur around the home and during building construction

• Installation of window and door frames

• Insulation of pipes

FEATURES

• Excellent adhesion on most materials (except PE/PP, Silicone, Teflon)

• High thermal insulation and sound absorption

• Very good filling capacities

• Quick and easy gap filler

• Excellent stability (no shrink)

Product information

• Packaging: 750ml non-returnable cans

• Color: Light Yellow

• Shelf Life: 12 months in un-opened from original packaging

• Storage Conditions: Store at temperature between +18 ℃ and +22 ℃.

TECHNICAL information

APPLICATION INSTRUCTIONS

SUBSTRATE PREPARATION

▪ The substrate must be free or dust, grease, oil and surface contaminants.

▪ The surface should be pre-moistened with water before application to ensure that:

(a) The foam cures at an optimum rate, and

(b) Secondary foam expansion is prevented.

APPLICATION METHOD / TOOLS

▪ Screw the Gun Dispensor onto the can

▪ Shake can thoroughly (approx. 20 times) before use.

▪ Apply foam by pointing nozzle into area to be filled and depressing. It can be applied valve up or down.

▪ Foam will dispense rapidly and will expand 1.2~2  times its size as it comes out of the can

▪ The quantity of foam can be regulated by

varying the pressure on the adaptor.

CLEANING OF TOOLS

▪ Remove fresh spots of foam immediately

using acetone or foam cleaner.

▪ Cured foam can only be removed mechanically.

STORAGE AND SAFETY

The aerosol cans must be stored in a vertical position under room temp. Content under pressure. Exposure to temperatures over + 50 °C may cause bursting. Contains diphenylmethane-4,4’-diisocyanate. Harmful by inhalation. Irritating to eyes, respiratory system and skin.

SAFETY MEASURES

• Apply the usual industrial hygiene.

• wear gloves and safety goggles

• remove cured foam by mechanical means only, never use a burner!

• Do not touch the surface during the curing time at frost temperatures.

• Always moisten surfaces before application in order to improve curing and cellular structure

• Cured PU Foam must be protected from UV radiation by painting.